Click to enlargeAltronix eBridge1PCRT eBridge1PCR and eBridge1PCT Kit.

eBridge1PCRT is a single port EoC Receiver and Transceiver kit that transmits data and power over coax cable. eBridge1PCR generates PoE up the coax to an eBridge1PCT transceiver. The transceiver in turn delivers that PoE compliant power to an edge device/camera. This plug and play unit facilitates system upgrades from analog to IP utilizing existing legacy Coax and eliminates the costs and labor associated with installing new network cabling. Data transmission and power over the Coax is possible up to 457m in comparison to 100m Ethernet distance (CAT5e). A maximum range from head end to the edge device/camera is 657m taking into consideration that up to 100m of structured cable may be deployed from the receiver to the network switch and the transceiver to the edge device/camera. Lifetime warranty. Made in the U.S.A. Power Supply Not Included see below.


  • Retrofit digital IP cameras in an analog CCTV installation.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
  • Extend Network link distance in an industrial environment.
  • Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.
  • Input:

  • 24VDC Class 2 power supply (polarity not observed) or 24VAC Class 2 plug-in transformer.
  • Power Consumption (under maximum load):

  • eBridge1PCR: 24VDC/1,000mA, 24VAC/900mA.
  • eBridge1PCT: Powered by eBridge1PCR.
  • Ethernet:

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5 or better structured cable.
  • Distance: up to 100m.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation.
  • PoE compliant to IEEE 802.3af (15W) delivered to camera by eBridge1PCT. Power provided by eBridge1PCR to eBridge1PCT by PoE protocol.
  • Throughput is rated to pass 25mbps of data at distances up to 457m with proper headend equipment which supports Megapixel, HD720, HD1080.
  • Coax:

  • Distance: up to 457m for power delivery of coax.
  • Connectivity: BNC, RG-59/U or similar.
  • LED Indicators:

  • eBridge1PCR:
  • Blue LED - Coax link connection.
  • Green - PoE ON.
  • Green - Power ON.
  • Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
  • eBridge1PCT:
  • Blue LED - Coax link connection.
  • Green LED - PoE from eBridge1PCR.
  • Environmental:

  • Operating Temperature:
  • eBridge1PCR: -4° F to 113° F (-20° C to +45° C).
  • eBridge1PCT: -4° F to 140° F (-20° C to +60° C).
  • Storage Temperature:
  • -22° to 158° F (-30° to +70° C).
  • Relative humidity: 85%, +/- 5%, non-condensing.
  • Operating Altitude: - 1000 to 6,561.679 ft. (-304.8 to 2000m).
  • Electrical:

  • BTU/Hr.:
  • 24VDC: 12.28.
  • 24VAC: 11.1.
  • Functions:

  • Auto detection and protection of legacy non-PoE cameras/devices.
Spec Sheet in PDF Format


24VAC 20VA Power Supply
24VAC 20VA Power Supply

Plug-in camera power supply for a single camera. Equipped with power LED

Security Design Services is a Woman-Owned Small Business Enterprise

Packaged security camera systems | Security Cameras | Pan Tilt Security Cameras | Video transmission | Security Camera Lenses | Monitors | Housings & mounts | Installation Necessities | Security Camera Power supplies | Power protection | Video Signal | Digital Video Recorders | Video Over Network

Contact Our Sales Dept.

Comments to: is TM & © 1999-2018 Security Design Services Corp. All promotional art, characters, logos and other depictions are TM & © their respective owners. All Rights Reserved.