Click to enlargeAltronix eBridge1CT IP over Coax Transceiver

Altronix eBridge1CT - IP over Coax transceiver is designed for use with eBridge1CR, eBridge4CR, and eBridge16CR receivers to enable fast 10/100Base-T Ethernet digital communication over coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended up to 610m (over five times the 100m Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit Composite Video Signal with Ethernet data simultaneously. Power Supply Not Included see below.

Applications:

  • Retrofit digital IP cameras in an analog CCTV installation.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
  • Extend Network link distance in an industrial environment.
  • Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.
  • Enables simultaneous transmission of composite and digital IP video.

  • Input:

  • 12VDC to 24VDC Class 2 power supply (polarity not observed) or 16VAC to 24VAC Class 2 plug-in transformer.
  • Power Consumption:

  • 12VDC/275mA, 24VDC/110mA,
  • 16VAC/375mA, 24VAC/200mA.
  • Ethernet:

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair Cat-5 or higher structured cable.
  • Distance: up to 100m.
  • Speed: 10/100BaseT, half/full duplex, auto negotiation.
  • Throughput is rated to pass 25mbps of data at distances up to 457m with proper headend equipment which supports Megapixel, HD720, HD1080.
  • Coax:

  • Distance: up to 457m.
  • Connectivity: BNC, RG-59/U or similar.
  • LED Indicators:

  • Blue LED - Coax link connection.
  • Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
  • Green LED - Power.
  • Environmental:

  • Operating Temperature:
  • 14° F to 122° F (-10° C to +50° C).
  • Storage Temperature: -4° to 158° F (-20° to 70° C).
  • Relative humidity: 85%, +/- 5%, non-condensing.
  • Operating Altitude: -1000 to 6,561.679 ft. (-304.8 to 2000m).
  • Electrical:

  • BTU/Hr.:
  • -VDC: 1.69 - 4.46 BTU/Hr.
  • BTU/Hr.:
  • -VAC: 2.46 - 3.07 BTU/Hr.
  • Accessories:

  • Composite video cable (included) - enables simultaneous composite video signal over the same Coax.
  • Power connector.
Spec Sheet in PDF Format



eBridge1CT$93.00

24VAC 20VA Power Supply
24VAC 20VA Power Supply

Plug-in camera power supply for a single camera. Equipped with power LED
TF2000$17.00


all_sites_strip
www.isourcecctv.com
cctvhardware.com
securityideas.com allkindscable.com




Security Design Services is a Woman-Owned Small Business Enterprise



Packaged security camera systems | Security Cameras | Pan Tilt Security Cameras | Video transmission | Security Camera Lenses | Monitors | Housings & mounts | Installation Necessities | Security Camera Power supplies | Power protection | Video Signal | Digital Video Recorders | Video Over Network

Contact Our Sales Dept.

Comments to: webmaster@securityideas.com

www.securityideas.com is TM & © 1999-2017 Security Design Services Corp. All promotional art, characters, logos and other depictions are TM & © their respective owners. All Rights Reserved.