IPX-CE-POE Network Security Camera Housing<br>w/ POE Heater & Fan

The IPX-CE-POE housing allows for a single CAT 5 network cable to power housing heater, fan and camera with a POE commection.

Low wattage fan & heater allow use of a IEEE 802.3af class 2 POE camera using standard POE injector

FEATURES

Material - Aluminum Zinc Alloy

Power over Ethernet input - Up to Class 4

Input voltage - 48VDC, 25.5W

Output voltage - 12VDC

Power consumption - Heater 4.2W, Fan 1.68W

Operating temp. - -20C – 50C (-4F – 122F)

Humidity - 5%-90% (non-condensation)

Heater Activates - – 5C (41F), Di-Activates – 15C (59F)

Fan - Activates – 50C (122F), Di-Activates – 45C (113F)

Wall Bracket Included Included

Environmental Rating - IP66

Outer dimensions - 5.9"(W) x 4.7"(H) x 12.6"(L) 150(W) x 120(H) x 320(L)

Inner dimensions - 4.9"(W) x 4.3"(H) x 11.8"(L) 125(W) x 110(H) x 300(L) mm

Weight - 4.2 lbs. (5.5 lbs. w/ mount) 4.6 lbs. (6 lbs. w/ mount)

POE injector sold seperately. See Below


		Power Over Ethernet (POE) Injector The IPX-INJ-C delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable. The IPX-INJ-C is 802.3af Compliant. Using Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet, giving you more freedom in placement. IPX-INJ-C$39.00


		Pelco POE20U560G High-Power, Single-Port Injector 19.6 WATT POWER OVER ETHERNET ADAPTER The Pelco POE20U560G Power over Ethernet (PoE) single port power injector is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. The injector offers total output power of 19.6 W, which meets the IEEE 802.3af standard for detection, connection, disconnection, and fault protection. POE20U560G$77.00