Pelco EH3515 Housing

The Pelco EH3515, EH3515-1 & EH3512-2 environmental housings are a low-cost camera enclosure constructed from die cast and extruded aluminum. The lower body length is 15.75 inches (40 cm). This housing is used for 2/3", 1/2" and 1/3" format cameras and fixed focal length lenses or motorized zoom lenses. The front hinged lid provides easy access to the removable camera sled. Two adjustable glands on the bottom of the enclosure allow for easy installation of the power and video cables. The rear link-lock latch can be used with a padlock of suitable size to secure the enclosure.

MaximumCamera Size: Accepts camera and lens combinations (including BNC connector) up to:EH3515 2.87" W x 3.00" H x 13.25" L (7.28 cm x 7.62 cm x 33.66 cm) EH3515-1, EH3515-2 2.87" W x 3.00" H x 12.00" L (7.28 cm x 7.62 cm x 30.48 cm)Viewing window .187" (4.76 mm) thick, optically clear impact-resistant MR5 coated Lexan ( U.L. 94HB rated). Viewing area 2.25"H X 2.63"W (5.71 cm X 6.68 cm). Heater & blower optional.

Spec Sheet in PDF format

Heater & Blower Specifications

Thermostatically controlled heater & blower will be factory installed before shipping. EH3512-1 & EH3515-1 Blower, continuous duty.

Blower

120 VAC

3.8 watts

10 cfm @ 60 Hz.

Heater

thermostatically controlled,

120 VAC

11 watts

Activates ON at 50°F (10°C); OFF at 80°F (26.67°C)

EH3512-2 & EH3515-2 Blower kit, continuous duty, 24 VDC (AC rectified), 1.92 watts, 19 cfm @ 50/60 Hz. Heater same as 120VAC model except 24VAC

Security Design Services is a Woman-Owned Small Business Enterprise