 |
 |  | POE (Power Over Ethernet) Benefits

|
 |
 |
 |  | POE Explained

|
 |
 |
 |  | Power Over Ethernet (POE) Injector
 The IPX-INJ-C delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet cable. The IPX-INJ-C is 802.3af Compliant. Using Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet, giving you more freedom in placement.

|
 |
 |
 |  | Pelco POE20U560G High-Power, Single-Port Injector
 19.6 WATT POWER OVER ETHERNET ADAPTER
The
Pelco POE20U560G
Power over Ethernet (PoE) single port power injector is
designed to meet the demanding data rate and power requirements
of IP cameras with high-quality streaming video capabilities. The
injector offers total output power of 19.6 W, which meets the IEEE
802.3af standard for detection, connection, disconnection, and fault
protection.

|
 |
 |
 |  | IPX-INJ-4C POE Injector 4 Port
 4 Port POE injector 802.3af Compliant. Compact and cost effective solution for remote Ethernet terminal.

|
 |
 |
 |  | Altronix Netway1 POE Midspan Injector
 Altronix NetWay1 Midspan provide power for PoE compliant cameras. They are available with one port in a compact insulated case. Cameras may be located up to 100m (328 ft.) from the NetWay unit.

|
 |
 |
 |  | Altronix Netway8 - 8 Port POE Mid-Span Injector
 Altronix NetWay8 Midspans provide power for PoE compliant cameras. They are available with eight or sixteen ports in a space saving 1U EIA 19” rack mount chassis which may be rack or shelf mounted.

|
 |
 |
 |  | Altronix Netway16 - 16 Port POE Mid-Span Injector
 Altronix NetWay16 Midspans provide power for PoE compliant cameras. They are available with eight or sixteen ports in a space saving 1U EIA 19” rack mount chassis which may be rack or shelf mounted. Cameras may be located up to 100m (328 ft.) from the NetWay unit.

|
 |
 |
 |  | Altronix Netway 1512 POE Mid Span Adapter
 Altronix Netway 13W adapter for conventional IP cameras. Use with NetWay1, NetWay8 or NetWay16 when camera needs external power.

|
 |
 |
 |  | Altronix Netway 3012 POE Mid Span Adapter
 Altronix Netway 25W adapter for conventional IP PTZ cameras. Use with NetWay1, NetWay8 or NetWay16 when camera needs external power.

|
 |
 |
 |  | Altronix NetWayXT PoE repeater module
 Altronix NetWayXT repeater modules interface with NetWay midspans to extend power and data (video) an additional
100m (328 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port
requirement.

|
 |
 |
 |  | Netgear FS108PNA 8 Port 10/100 Switch w/ 4 Port POE
 The ProSafe FS108P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power.

|
 |
 |
 |  | Netgear FS116PNA 16 Port 10/100 Switch w/ 8 Port POE
 The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power.

|
 |
 |
 |  | AXIS Power over LAN Midspan & Power over LAN Active Splitter
 Network video without the need for power outlets -
With the use of Power over LAN Midspan and Power over LAN Active Splitter, Axis network video products can receive both data and power over a single Ethernet cable.

|
 |